Plus-X
Gizmo
September 04, 2010 - 07:37 Filed in: Monochrome | Animals
Dogs have personality. Some are easy going affable types. Some are high strung and high maintenance. Ours is a “mommy’s dog”. Being a rescue critter, he has issues. For the first few months that we had him, he thought my arm needed more scars. He was scared, anxious, and likely abused by his former owners. We did our best to calm and discipline him as he became part of our ‘pack’. His portraits say it all. He still has a problem with FedEx and UPS drivers. All snarls and teeth, he hides behind his “mom” during the performance. I don’t think we will ever break him of that.
My portrait gallery shows a few of his moments. My favorite is captured in this monochrome print. I used Kodak Plus-X shot with a 50mm f/1.8 lens mounted on a Nikkormat FTn and developed in HC-110 (dilution B) developer.
My portrait gallery shows a few of his moments. My favorite is captured in this monochrome print. I used Kodak Plus-X shot with a 50mm f/1.8 lens mounted on a Nikkormat FTn and developed in HC-110 (dilution B) developer.
‘Smile!’
Prairie Skies and Red #29
I grew up on the prairies of Saskatchewan, Manitoba, and North Dakota. Each summer, my family would drive to Alberta or Ontario on vacations to see relatives or go camping. Outside of the city, the tallest buildings were grain elevators spaced about ten miles apart from each other along the railroad lines and appeared to be tied together with the telephone lines passing from pole to pole. These icons of the prairie stand in solitude winter and summer, storing the harvest until the commodity markets were just right. Tractors and equipment harvested the grain, the trucks hauled it in, and the elevator would weigh it, store it, and load it into railroad hopper cars.
Traditional grain elevators are becoming extinct since concrete grain terminals have emerged. It won’t be long until they are all torn down or collapse from neglect. They have been around for more than a century standing like signposts for ‘POOL’, ‘PIONEER’,’ UGG’, and a number of independent brokers. America named its towns after water towers and Canada named her towns after grain elevators, or so it seems.
I began to process the monochrome film that I shot in rural Minnesota last month. I experimented with a variety of film-developer combinations and filtration. Most of the film was shot with a red #29 filter, which is slightly darker than the #25. The beauty of using red filters with monochrome film is that they bring out very dark and dramatic skies but leave the tonality of clouds. That is, they filter out the blue wavelengths of light to darken the sky and enhance the billowing or feathery clouds. Red filtration also draws out the texture of the metal siding on buildings to appear more like engraved lithographs than photographs.
The results are in the Rural gallery. Bright clouds contrast the geometric elevators and ribbed grain bins against the sky. I used Fuji Acros monochrome film shot at ISO 100 and developed in Edwal FG-7 at 1:15 dilution for 9 minutes. Edwal recommends agitation every 30 seconds for 5 seconds, but after looking at the negatives I would rather process Acros for about 11 minutes and agitate the tank once every minute for 10 seconds. The negatives were so thin that they were nearly unprintable and I was surprised to see how well the images looked. They bring out the kind of texture that gives monochrome film its character. I also shot Plus-X at ISO 80 and processed it in FG-7 for 8 minutes which was about right. The negatives were denser and provided a bit less contrast. The Versatile 435 tractor images are good examples.
Traditional grain elevators are becoming extinct since concrete grain terminals have emerged. It won’t be long until they are all torn down or collapse from neglect. They have been around for more than a century standing like signposts for ‘POOL’, ‘PIONEER’,’ UGG’, and a number of independent brokers. America named its towns after water towers and Canada named her towns after grain elevators, or so it seems.
I began to process the monochrome film that I shot in rural Minnesota last month. I experimented with a variety of film-developer combinations and filtration. Most of the film was shot with a red #29 filter, which is slightly darker than the #25. The beauty of using red filters with monochrome film is that they bring out very dark and dramatic skies but leave the tonality of clouds. That is, they filter out the blue wavelengths of light to darken the sky and enhance the billowing or feathery clouds. Red filtration also draws out the texture of the metal siding on buildings to appear more like engraved lithographs than photographs.
The results are in the Rural gallery. Bright clouds contrast the geometric elevators and ribbed grain bins against the sky. I used Fuji Acros monochrome film shot at ISO 100 and developed in Edwal FG-7 at 1:15 dilution for 9 minutes. Edwal recommends agitation every 30 seconds for 5 seconds, but after looking at the negatives I would rather process Acros for about 11 minutes and agitate the tank once every minute for 10 seconds. The negatives were so thin that they were nearly unprintable and I was surprised to see how well the images looked. They bring out the kind of texture that gives monochrome film its character. I also shot Plus-X at ISO 80 and processed it in FG-7 for 8 minutes which was about right. The negatives were denser and provided a bit less contrast. The Versatile 435 tractor images are good examples.
High Dilution Development
I found a post on the APUG website suggesting that Rodinal developer could be diluted far beyond its design limitation to produce images with interesting tonal and textural qualities. I use Rodinal 1:25 for fine grain film, like Plus-X and Maco 100 Plus, to produce monochrome prints with high acutance and just a touch of grain, but after reading about diluting it to 1 part concentrate and 100 parts water, I just had to try it.
To create the solution with as little variability as possible, I mixed 10ml of Rodinal concentrate with 500 ml water to create a 1:50 solution. After removing 250 ml of that solution, I replaced it with 250 ml of water for the final 1:100 solution. I let the film sit in the ‘soup’ for half an hour, agitated the tank slowly three times in a ten-second interval, and then let it sit for another half hour. To stop development, I emptied the tank and then filled it with water and let it rest for another 5 minutes. This lets whatever developer is left to work on the shadow areas whereas stop bath would have stopped development in its tracks. I fixed and washed the negatives in the usual way.
Many of the images were lost to poor composition, but the ones I kept were rather extraordinary. I photographed an old diesel engine that I found sitting on a lot and rusting into oblivion. The combination of grain and high contrast gives the images a gritty, industrial feel and exaggerates the lines in the machine, especially on the exposed valve springs. I just ‘feels’ ancient.
I also found some arborists removing a dying tree and photographed them. The camera was a Pentax Spotmatic F. The lens that I used to photograph the engine was a Takumar 50mm f/1.8 and, for the arborists, a Takumar 135mm f/3.5.
I wouldn’t recommend high dilution development for that once in a lifetime shot, but I was rather pleased with the texture and tonality that I got from the experiment. You will find ‘Where’s Waldo’ and ‘Arborist’ in the ‘Portrait’ gallery and ‘Industrial Mortality’ and ‘Potential Energy’ in the ‘Ancient Industry’ gallery.
Great fun on a Saturday afternoon!
To create the solution with as little variability as possible, I mixed 10ml of Rodinal concentrate with 500 ml water to create a 1:50 solution. After removing 250 ml of that solution, I replaced it with 250 ml of water for the final 1:100 solution. I let the film sit in the ‘soup’ for half an hour, agitated the tank slowly three times in a ten-second interval, and then let it sit for another half hour. To stop development, I emptied the tank and then filled it with water and let it rest for another 5 minutes. This lets whatever developer is left to work on the shadow areas whereas stop bath would have stopped development in its tracks. I fixed and washed the negatives in the usual way.
Many of the images were lost to poor composition, but the ones I kept were rather extraordinary. I photographed an old diesel engine that I found sitting on a lot and rusting into oblivion. The combination of grain and high contrast gives the images a gritty, industrial feel and exaggerates the lines in the machine, especially on the exposed valve springs. I just ‘feels’ ancient.
I also found some arborists removing a dying tree and photographed them. The camera was a Pentax Spotmatic F. The lens that I used to photograph the engine was a Takumar 50mm f/1.8 and, for the arborists, a Takumar 135mm f/3.5.
I wouldn’t recommend high dilution development for that once in a lifetime shot, but I was rather pleased with the texture and tonality that I got from the experiment. You will find ‘Where’s Waldo’ and ‘Arborist’ in the ‘Portrait’ gallery and ‘Industrial Mortality’ and ‘Potential Energy’ in the ‘Ancient Industry’ gallery.
Great fun on a Saturday afternoon!
Submarines
The hardest part about shooting submarines is finding them. The Navy likes it that way, but it is frustrating for a photographer with a penchant for photographing military subjects, especially those located in his own back yard.
I live just a few miles from the Puget Sound Naval Shipyard and the submarine base at Bangor, Washington. My day job has a bit to do with supporting their mission but I still can’t get near a sub with a camera without running afoul of Navy security officers. The best I can do is use my imagination while lingering around naval museums and, of course, the mothball fleet.
When I took my Minolta SRT-200 for a walk around the Bremerton waterfront, I came across the salvage remains of the decommissioned Sturgeon-class submarine USS Parche (SSN-683) erected as a monument in front of the shipyard gate. “Secret Savior” places the leading edge of this ship’s sail against the mid day sun. I could feel the majesty of this leviathan breaching the surface of the ocean as I framed the image in the viewfinder. “Service Record” is my favorite of the two. It displays the service history of the Parche using symbology well known to submariners. I rather like the highlights of the dive planes and raised access plates against the dark structure. The grain of Plus-X film processed in Rodinal developer provides a cold and industrial nuance to the image. Also in this gallery are photographs of the World War II veteran USS Bowfin, which is permanently docked at Pearl Harbor, Hawaii. I gave these photographs the look of color prints from the 1950s. It was the only way I could salvage them from a lousy exposure.
You can see these images in my ‘Military’ gallery. Until I can get access to the submarine mothball docks or stumble onto a ‘boomer’ passing under the Hood Canal bridge, I have to rely on what I can find within public view at the shipyard, the Naval Undersea Museum at Keyport, or whatever else I can find locally.
I live just a few miles from the Puget Sound Naval Shipyard and the submarine base at Bangor, Washington. My day job has a bit to do with supporting their mission but I still can’t get near a sub with a camera without running afoul of Navy security officers. The best I can do is use my imagination while lingering around naval museums and, of course, the mothball fleet.
When I took my Minolta SRT-200 for a walk around the Bremerton waterfront, I came across the salvage remains of the decommissioned Sturgeon-class submarine USS Parche (SSN-683) erected as a monument in front of the shipyard gate. “Secret Savior” places the leading edge of this ship’s sail against the mid day sun. I could feel the majesty of this leviathan breaching the surface of the ocean as I framed the image in the viewfinder. “Service Record” is my favorite of the two. It displays the service history of the Parche using symbology well known to submariners. I rather like the highlights of the dive planes and raised access plates against the dark structure. The grain of Plus-X film processed in Rodinal developer provides a cold and industrial nuance to the image. Also in this gallery are photographs of the World War II veteran USS Bowfin, which is permanently docked at Pearl Harbor, Hawaii. I gave these photographs the look of color prints from the 1950s. It was the only way I could salvage them from a lousy exposure.
You can see these images in my ‘Military’ gallery. Until I can get access to the submarine mothball docks or stumble onto a ‘boomer’ passing under the Hood Canal bridge, I have to rely on what I can find within public view at the shipyard, the Naval Undersea Museum at Keyport, or whatever else I can find locally.
